| ▼ 3dec | |
| ▼ block | |
| ► interface | |
| ibeamarray.h | Container to store BeamThings |
| ibeamcontact.h | This interface provides access to beam contact data |
| ibeamthing.h | This is the interface for BeamThing, a C++ wrapper for beam elements |
| ibfacearray.h | Container to store block faces PRE-zoning or triangulation |
| iblockarray.h | Container to store blockThings |
| iblockdef.h | Fortran to C++ type declarations |
| iblockthing.h | This is the interface for BlockThing, a class that holds extra data not in the fortran arrays |
| icablearray.h | Container to store CableThings |
| icablething.h | This is the interface for CableThing, a C++ wrapper for cable elements |
| iconfigure.h | This interface provides access to configuration settings |
| icontactarray.h | Container to store ContactThings |
| icontactthing.h | This is the interface for ContactThing, a class that holds extra data not in the fortran arrays |
| idowelarray.h | Container to store DowelThings |
| idowelthing.h | This is the interface for DowelThing, a C++ wrapper for cable element dowel segments |
| ifacearray.h | Container to store block faces POST-zoning or triangulation |
| ifaceblockarray.h | Container to store blockThings that are face blocks |
| ifacedata.h | Allows access to face scalar data in a generic way |
| ifacething.h | This is the interface for FaceThing, a class that holds extra data not in the fortran arrays |
| ifefacearray.h | Container to store FEFaceThings |
| ifefacething.h | This is the interface for FEFaceThing, a wrapper for finite element faces |
| ifelementarray.h | Container to store FElementThings |
| ifelementthing.h | This is the interface for FElementThing, a wrapper for finite elements |
| iflowknotarray.h | Container to store FlowKnotThings |
| iflowknotthing.h | This is the interface for FlowKnotThing, a C++ wrapper for a flow knot |
| iflowplanearray.h | Container to store FlowPlaneThings |
| iflowplanething.h | This is the interface for FlowPlaneThing. A FlowPlaneThing represents the top of the fluid flow object hierarchy. Other flow objects such as flow plane zones and vertices can be obtained for each flow plane |
| iflowplanevertexarray.h | Container to store FlowPlaneVertexThings |
| iflowplanevertexthing.h | This is the interface for FlowPlaneVertexThing, a C++ wrapper for a flow plane vertex |
| iflowzonearray.h | Container to store FlowZoneThings |
| iflowzonething.h | This is the interface for FlowZoneThing. A FlowZoneThing represents one triangular zone in the flow plane |
| igpdata.h | Allows access to gridpoint scalar data in a generic way |
| ijointarray.h | Container to store JointFaceThings |
| ijointthing.h | This is the interface for JointFaceThing. A JointFaceThing represents a triangle face used only for plotting |
| ilinerarray.h | Container to store LinerThings |
| ilinerthing.h | This is the interface for LinerThing, a C++ wrapper for liner elements |
| imoduleblock.h | |
| irangeelement3dec.h | This interface provides access to filters |
| irangeelementgint.h | Interface to a group intersection filter element, used to filter objects by group intersection |
| irangeelementstate.h | Interface to a filter element that allows user to filter based on a zone state |
| ireinforcementarray.h | Container to store ReinforcementThings |
| ireinforcementthing.h | This is the interface for ReinforcementThing, a C++ wrapper for reinforcement elements |
| iselnodearray.h | Container to store SELNodeThings |
| iselnodething.h | This is the interface for SELNodeThing, a wrapper class for all structural element nodes |
| iselprop.h | This is the interface for SelProp, a C++ wrapper for structural element properties |
| iselproparray.h | Container to store SelProps |
| isubcontactarray.h | Container to store SubcontactThings |
| isubcontactthing.h | This is the interface for SubcontactThing, a class that holds extra data not in the fortran arrays |
| itype3dec.h | This interface is a central point to get type const char pointers |
| ivertexarray.h | Container to store VertexThings |
| ivertexthing.h | This is the interface for VertexThing |
| iwater.h | This interface provides access to water table data |
| izonearray.h | Container to store ZoneThings |
| izonedata.h | This interface provides access to zone data |
| izonefielddata.h | Interface for accessing the zone field data |
| izoneinterpolate.h | Interface for accessing the zone interpolation class |
| izonething.h | This is the interface for ZoneThing, a class that holds extra data not in the fortran arrays |
| ▼ blockpython | |
| ► interface | |
| imoduleblockpython.h | |
| ▼ blocksel | |
| ► interface | |
| imoduleblocksel.h | |
| ▼ common | |
| ▼ base | |
| ► src | |
| avect.h | Angular Vectors |
| axes.h | 2D and 3D cartesian Axes systems |
| base.h | One stop include for all objects defined as part of base interface |
| basebool.h | Base C++ types, kept out of basedef.h in case one needs to include it in C files |
| basedef.h | Base type definitions for the engine |
| baseexception.h | |
| basei.h | |
| basememory.h | Comment point for memory allocation in all modules |
| basemutex.h | |
| baseqstring.h | |
| baseqt.h | All default base headers if Qt is being used |
| basestring.h | QString helper functions, plus some additions |
| basetoqt.h | Combines base interface with Qt – allows Qt to interact with other Base types transparently |
| basewin.h | |
| callback.h | |
| caxes.h | 2D and 3D cartesian Axes systems that are compact |
| cube.h | Three dimensional extent aligned with cartesian axes |
| expected.h | |
| export.h | Defines automatic generation of DLL exports and imports for each system supported |
| extent2.h | |
| extent3.h | Three dimensional extent aligned with cartesian axes |
| farray.h | An array class that attempts to minimize unnecessary heap access |
| flatarray.h | |
| hexahedron.h | |
| idef.h | |
| istring.h | |
| istringlist.h | |
| ivariant.h | |
| limit.h | Std::numeric_limits shorthand, with debug overflow checking |
| mat.h | |
| matrix.h | A template-based matrix class, size fixed at compile time |
| orientation.h | Class for storing an "orientation", or a direction in 2D or 3D space |
| property.h | |
| quat.h | 2D and 3D quaternion utility classes |
| random.h | |
| spinlock.h | |
| symtensor.h | A Symmetric 2nd order tensor |
| to.h | A overflow checked shorthand for static_cast<T>() |
| type_selector.h | |
| variant.h | A simpler (and slightly faster) version of a QVariant, added for interfaces that do not use Qt |
| vect.h | 2D and 3D vector utility classes |
| version.h | |
| win32specific.h | |
| ▼ contact | |
| ► interface | |
| icontactmodule.h | |
| ifragment.h | |
| ifragmentlogic.h | |
| ifragmentmodule.h | |
| ▼ contactmodel | |
| ► src | |
| contactmodel.h | Contact model class |
| contactmodel_global.h | |
| contactmodelfluid.h | |
| contactmodelmechanical.h | Mechanical contact model class |
| contactmodelthermal.h | |
| ▼ dfn | |
| ► interface | |
| idfncluster.h | |
| idfntemplate.h | |
| ifracnetwork.h | |
| ifracture.h | |
| iintersect.h | |
| iintersectionset.h | |
| imoduledfn.h | |
| irangeelementdfngen.h | |
| ivertexdfn.h | |
| ▼ dfnpython | |
| ► interface | |
| imoduledfnpython.h | |
| ▼ fish | |
| ► interface | |
| idebug.h | |
| iglobalruntime.h | |
| iinput.h | |
| imain.h | |
| ioutput.h | |
| iparameter.h | |
| iparametervalue.h | |
| isymbol.h | |
| librarydata.h | |
| ▼ geometry | |
| ► interface | |
| igeometry.h | Interface for a user-defined geometric point |
| igeomimportexport.h | Interface for geometric objects export-imports |
| igeomset.h | The interface for a container of a single "set" of geometry elements, representing points, edges, polygons, etc |
| irangeelementgeometrydistance.h | |
| irangeelementgeometryspace.h | |
| ▼ jmodels | |
| ► src | |
| jmodelbase.h | |
| jointmodel.h | The base class for joint constitutive model plug-ins |
| state.h | The base class for constitutive model plug-ins |
| stdafx.h | |
| stdafx2.h | |
| ▼ kernel | |
| ► fishexample | |
| fishexample.cpp | |
| fishexample.h | Example implentation of the IFishLibrary interface |
| resource.h | |
| ► interface | |
| icommandmodule.h | |
| idxfdata.h | Handle geometric data generated by a IDXFReader |
| idxfreader.h | DXF Reader interface class |
| ifactorofsafety.h | |
| ifishplot.h | This interface exposes a plot data interface (IGeneralPlot) to FISH |
| ikernel.h | This interface provides an entry point for command processing |
| ilabel.h | Interface to a single label |
| ilabellist.h | Interface to the list of all labels in the system |
| iprogram.h | The main interface access point |
| irangeelementextra.h | |
| irangeelementfish.h | Interface for providing an IRangeElement extension for a RangElementFish |
| irangeelementinteractive.h | Interface for accessing informations in the three drawable "interactive" filter elements in kernel/src/rangeelementinteractive.h (polygon,rectangle,ellipse) |
| irangeelementname.h | |
| irangeelementorientation.h | |
| irangeelementtype.h | IRangeElementExtension classes provide access information in the Filters that are included in the Kernel library |
| ▼ models | |
| ► src | |
| conmodel.h | The base class for constitutive model plug-ins |
| conmodelbase.h | |
| convert.h | The base class for constitutive model plug-ins |
| igenerictet.h | |
| igenericzone.h | Generic base class for the zone interface made available to the constitutive model system |
| propertyblock.h | This class provides reference count for model properties |
| sharedpropertyblock.h | This class allows zones to share model properties minimizing memery usage. Models currently using this class are: elastic |
| state.h | The base class for constitutive model plug-ins |
| ▼ modelsutil | |
| ► interface | |
| ifetchproperty.h | |
| imodellist.h | |
| ▼ module | |
| ► interface | |
| dim.h | DIM - Provides code portability between 2D and 3D codes |
| iallcontactcontainer.h | |
| ibody.h | |
| ibodycontainer.h | |
| ibodyfluid.h | |
| ibodymechanical.h | |
| ibodymechanicalcontainer.h | |
| ibodythermal.h | |
| icellspace.h | Interface to a "refining" cell space |
| icontact.h | Contact class |
| icontactfluid.h | |
| icontactmechanical.h | ContactMechanical class |
| icontactmodellist.h | |
| icontactmodule.h | |
| icontactthermal.h | ContactThermal class |
| icontaineractivecontact.h | |
| icontainerallactivecontact.h | |
| icontainercontact.h | Contact container class |
| idata.h | |
| idomain.h | IDomain class - define the model boundaries |
| idxfdata.h | Handle geometric data generated by a IDXFReader |
| idxfreader.h | DXF Reader interface class |
| ienergymap.h | Interface to EnergyMap class |
| iextension.h | Interface class for acessing extension stored in the base class of other things |
| ifishcalllist.h | |
| igeneralplot.h | This class allows user to draw basic geometric plots using FISH functions |
| igenericmodellist.h | |
| igeomedge.h | Interface for a user-defined geometric point |
| igeompoint.h | Interface for a user-defined geometric point |
| igeompoly.h | The interface for a geometry polygon representing a closed collection of edges |
| iglobals.h | Interface to module global settings |
| igrouplist.h | Group container class |
| ihalfedge.h | |
| ihalffacet.h | |
| ihalfvertex.h | |
| ihistory.h | Interface to a particular history being taken by the history logic |
| ihistorylist.h | Interface to the list of all IHistories being taken by the history logic |
| iident.h | Central class for information identifying the particular program using the kernel library |
| iinputitem.h | |
| ikernelbase.h | |
| ilinktype.h | Interface for LinkType<> objects, POD that contain both the pointer to the next object and an index for reference within the next object |
| imacros.h | |
| imaxwelldamp.h | Interface to maxwell damping |
| inoticemanager.h | Interface to the notification system |
| iparenttochildcontainer.h | |
| iparse.h | Interface to the main command processing class |
| iparticletrace.h | Interface to a particular particle trace being taken by the particle trace logic |
| iparticletracelist.h | Interface to the list of all IParticleTraces being taken by the particle trace logic |
| ipiece.h | |
| ipiececontainer.h | |
| ipieceextension.h | |
| ipiecefluid.h | |
| ipiecemechanical.h | |
| ipiecemechanicaldata.h | |
| ipiecethermal.h | |
| iplane.h | Interface for the definition of a Plane in 3D space |
| iprocess.h | |
| iprocesslist.h | |
| irandom.h | Interface to the random number generator |
| irange.h | Interface to a filter, used as the main method for filtering objects |
| irangeelement.h | Interface to a filter element, which is a member of a IRange |
| irangeelementcontact.h | |
| irangeelementgroup.h | Interface to a group filter element, used to filter objects by group assignment |
| irangeelementregistry.h | Interface to a access the list of filter elements types registered with the engine |
| irangeelementset.h | |
| irangeelementsurface.h | Interface to a filter element that allows user to filter based on connection to a "surface" of the zones |
| irangeelementutil.h | |
| irangelist.h | Interface to the global list of all named filters |
| irayleighdamp.h | Interface to maxwell damping |
| irigidbodymechanical.h | |
| isettings.h | Interface for accessing kernel settings |
| isolvelimits.h | |
| isphere.h | |
| itable.h | Interface to a particular table of values |
| itablelist.h | Interface to the global list of all tables |
| iudpos.h | IUDPos interface for user defined data that includes a position in space |
| iudscalar.h | IUDScalar is a IUDType<double>, for user-defined scalar |
| iudscalarlist.h | Interface for the list of all IUDScalar (user defined tensor). Get with "UDScalar" |
| iudtensor.h | IUDTensor is a IUDType<SymTensor>, for user-defined tensor data |
| iudtensorlist.h | Interface for the list of all IUDTensor (user defined tensor) |
| iudtype.h | IUDType is a template interface class, for values of different types that can be used as user-defined data |
| iudtypelist.h | IUDTypeList is a template interface, for a container of IUDType objects |
| iudvector.h | IUDVector is a IUDType<DVect>, for user-defined vectors |
| iudvectorlist.h | Interface for the list of all IUDVector (user defined tensor) |
| ▼ python | |
| ► interface | |
| ipythonmodule.h | Interface for the Python module |
| ▼ sel | |
| ► interface | |
| imodulesel.h | |
| irangeelementseltype.h | Interface to a filter element that allows user to filter based on a SEL type |
| isel.h | Interface to the structural elements base class |
| iselbeam.h | Interface to beam structural elements |
| iselcable.h | Interface to cable structural elements |
| iseldowel.h | Interface to dowel structural elements |
| iselgeogrid.h | Interface to geogrid structural elements |
| iselhybrid.h | Interface to hybrid structural elements |
| iselliner.h | Interface to liner structural elements |
| iselliner2d.h | Interface to liner structural elements |
| isellink.h | Interface to provide access to structural element links |
| isellinklist.h | Interface to the global list of all structural elements links |
| isellinkmodel.h | Interface to provide access to a structural element constitutive model |
| isellist.h | Interface to the global list of all structural elements |
| iselnode.h | Interface to provide access to structural element nodes |
| iselnodelist.h | Interface to the global list of all structural elements nodes |
| iselpile.h | Interface to pile structural elements |
| iselshell.h | Interface to shell structural elements |
| ▼ selpython | |
| ► interface | |
| imoduleselpython.h | |
| ▼ utility | |
| ► interface | |
| icontainer.h | Interface for container of IThings |
| ideletenotice.h | |
| igroup.h | |
| iguiinput.h | |
| iinputrecord.h | |
| ikernelinput.h | |
| ikerneloutput.h | |
| imulticontainer.h | |
| ipollster.h | Polling interface - kernel should call periodically to give UI access to kernel data |
| itextinput.h | |
| itextoutput.h | |
| ithing.h | Base class for items that will be stored in containers |
| ▼ flac3d | |
| ▼ body | |
| ► interface | |
| ibody.h | Interface for a user-defined geometric point |
| ibodyblock.h | Interface to provide access to a IBodyBlock |
| ibodyedge.h | Interface to provide to a specifics related to IBodyEdge (related to Body snapon tool but not general GeomEdge) |
| ibodyface.h | Interface to provide to a specifics related to IBodyFace (related to Body snapon tool specifics but not general GeomPoly) |
| ibodypoint.h | Interface to provide to a specifics related to IBodyPoint (related to Body snapon tool but not general GeomPoint) |
| ibodyset.h | The interface for a container of a single "set" of geometry elements, representing points, edges, polygons, etc |
| imodulebody.h | |
| ▼ extruder | |
| ► interface | |
| iextrudeblock.h | |
| iextrudeedge.h | |
| iextrudepath.h | Provides interface to IExtrudePath. Contains containers for nodes, segments objects |
| iextrudepoint.h | |
| iextruderegion.h | |
| iextrudeset.h | Provides interface to IExtrudeSet. Contains containers for points, edges and blocks objects |
| iextrudesetlist.h | Provides interface to IExtrudeSetList, an IContainer of IExtrudeSet objects |
| ▼ zone | |
| ► interface | |
| iapply.h | |
| iapplyitem.h | |
| iapplyitemlist.h | |
| iapplyitemzone.h | |
| iapplylist.h | |
| iattach.h | Interface to a attachment object |
| iattachlist.h | Interface for accessing the global list of attachments |
| iattachpoint.h | |
| ibodylogic.h | |
| icparticlelist.h | Particle tracking logic |
| icreepmodule.h | Interface to the Creep Module, , see IModuleExtension |
| idynamicmodule.h | Interface to the Dynamic Module, see IModuleExtension |
| idynnode.h | Interface to access dynamic node data |
| idynzone.h | Interface to access dynamic zone data |
| iface.h | Interface to zone faces |
| ifaceweight.h | Interface to zone faces |
| ifetchfluidproperty.h | |
| ifetchthermalproperty.h | |
| ifluidgp.h | Interface to access fluid gridpoint data |
| ifluidmodule.h | Interface to the Fluid Module |
| ifluidperm.h | |
| ifluidsat.h | |
| ifluidzone.h | Interface to access fluid zone data |
| igp.h | Interface to provide access to a gridpoint |
| igpdata.h | Allows access to gridpoint scalar data in a generic way |
| igplist.h | Interface to the global list of all grid points |
| ihysdamp.h | Interface to hysteretic damping |
| iintelem.h | |
| iinter.h | Interface to FLAC3D's interface constitutive model |
| iinterlist.h | |
| iintmodel.h | |
| iintnode.h | |
| imodulezone.h | |
| inode.h | Interface to access node data |
| irangeelementmodel.h | Interface to a filter element that allows user to filter based on a zone model |
| irangeelementorientation.h | Interface to a filter element that allows user to filter based on the orientation of zone faces |
| irangeelementstate.h | Interface to a filter element that allows user to filter based on a zone state |
| irangeelementvolume.h | Interface to a filter element that allows user to filter based on a volume |
| isurface.h | Interface to provide access to surfaces, see command GEN SURFACE |
| isurfacelist.h | Interface to the global list of all surfaces, see command GEN SURFACE |
| itet.h | Interface to one of the tetrahedra used to implement mixed-discretization in a zone |
| ithermanasource.h | ThermAnaSource interface for thermal analytical source |
| ithermanasourcelist.h | Interface to the global list of all thermal analytical sources |
| ithermgp.h | Interface to access gridpoint thermal data |
| ithermmodule.h | Interface to the thermal module |
| ithermzone.h | Interface to access zone thermal data |
| iwatertable.h | Interface for accessing water table data |
| izone.h | Interface to provide access to a zone |
| izonedata.h | Allows access to zone scalar data in a generic way |
| izonefielddata.h | Interface for accessing the zone field data |
| izoneglobals.h | Interface to access FLAC3D data, see SET and CONFIG commands |
| izoneinterpolate.h | Interface for accessing the zone interpolation class |
| izonelist.h | Interface for accessing the global list of zones |
| ▼ zonepython | |
| ► interface | |
| imodulezonepython.h | |
| ▼ zonesel | |
| ► interface | |
| imodulezonesel.h | |
| ▼ pfc | |
| ▼ ccfd | |
| ► interface | |
| iballfluid.h | |
| ibodyfluidcontainer.h | |
| iccfdelement.h | |
| iccfdhex.h | |
| iccfdtet.h | |
| iclumpccfd.h | |
| ielementcontainer.h | |
| ielementfluidcontainer.h | |
| imoduleballfluid.h | |
| imoduleccfd.h | Interface for the PFC ccfd module |
| imoduleclumpccfd.h | |
| ipebbleccfd.h | |
| ▼ ccfdpython | |
| ► interface | |
| iccfdpython.h | |
| ▼ contactpfcrblock | |
| ► interface | |
| icontactballrblock.h | |
| icontactpebblerblock.h | |
| icontactpfcrblockmodule.h | |
| icontactrblockfwall.h | |
| ▼ pfcmodule | |
| ► interface | |
| iball.h | Interface for a ball |
| iballmechanical.h | |
| ibrick.h | |
| iclump.h | Interface for clumps |
| iclumptemplate.h | Interface for clump templates |
| icontactballball.h | |
| icontactballfwall.h | |
| icontactballpebble.h | |
| icontactpebblefwallfacet.h | |
| icontactpebblepebble.h | |
| icontactwallwall.h | |
| ifwall.h | Interface for a faceted wall |
| ighostball.h | |
| ighostpebble.h | |
| ihalffacetparent.h | |
| ihalfvertexparent.h | |
| iinlet.h | |
| imeasure.h | |
| imoduleball.h | |
| imoduleballmechanical.h | |
| imodulebrick.h | |
| imoduleclump.h | Interface for the Clump module |
| imodulecontactballclump.h | |
| imodulecontactballwall.h | |
| imodulecontactclumpwall.h | |
| imodulemeasure.h | |
| imodulewall.h | Interface for the wall module |
| ipebble.h | |
| ipfcmodule.h | Interface for the PFC module |
| itripoly.h | Interface for a TriPoly |
| iwall.h | Interface for a generic wall |
| ▼ pfcpythonmodule | |
| ► interface | |
| ipfcpythonmodule.h | Interface for the PFC-Python module |
| ▼ pfcsel | |
| ► interface | |
| imodulepfcsel.h | |
| ▼ pfcthermalmodule | |
| ► interface | |
| iballfluid.h | |
| iballthermal.h | |
| iclumpthermal.h | |
| icontactfluidballball.h | |
| icontactfluidballfwallfacet.h | |
| icontactthermalballball.h | |
| icontactthermalballfwallfacet.h | |
| icontactthermalballpebble.h | |
| icontactthermalpebblefwallfacet.h | |
| icontactthermalpebblepebble.h | |
| ifwallfacetfluid.h | |
| ifwallfacetthermal.h | |
| ifwallfluid.h | |
| ifwallthermal.h | |
| imoduleballthermal.h | |
| imoduleclumpthermal.h | |
| imodulecontactfluidballfwallfacet.h | |
| imodulecontactthermalballfwallfacet.h | |
| imodulecontactthermalballpebble.h | |
| imodulecontactthermalpebblefwallfacet.h | |
| imodulefwallfluid.h | |
| imodulefwallthermal.h | |
| imodulepfcfluid.h | |
| ipebblethermal.h | |
| ipfcthermalmodule.h | |
| ▼ pfcthermalpython | |
| ► interface | |
| ipfcthermalpython.h | |
| ▼ rblock | |
| ► interface | |
| icontactrblockrblock.h | |
| ighostrblock.h | |
| irblock.h | |
| irblockmodule.h | |
| irblocktemplate.h | |
| ▼ rblockpythonmodule | |
| ► interface | |
| irblockpythonmodule.h | Interface for the RBlock-Python module |
| ▼ rblocksel | |
| ► interface | |
| imodulerblocksel.h | |
| ▼ rblockthermal | |
| ► interface | |
| icontactthermalballrblock.h | |
| icontactthermalpebblerblock.h | |
| icontactthermalrblockfwallfacet.h | |
| icontactthermalrblockrblock.h | |
| irblockthermal.h | |
| irblockthermalmodule.h | Interface for the RBLOCK thermal module |
| ▼ wallsel | |
| ► interface | |
| iwallselmodule.h | |
