# 3DEC Examples

On This Page

Tutorials Example Applications Verification Problems

On 3DEC Examples Index

Examples listed on this page are of three types: Tutorials, Example Applications, and Verification Problems. *Every* 3DEC example available in this documentation is found in the comprehensive examples index.[#]_

## Tutorials

## Example Applications

- Stability of an Open Pit in a Jointed Rock Mass
- Assessment of Fault Slip Potential from Sill Pillar Mining
- Highway Loading of an Arch Bridge
- Hydraulic Fracture with DFN
- Excavation in a Saturated Soil
- Flying Buttress
- Flemish Wall
- Discrete Fracture Network (Advanced)
- Finite Element Dam
- Open Pit with Face Blocks
- Open Pit with Octree Blocking
- Supported Tunnel
- UCS Test with Fragmentation
- UCS Test with Voronoi Blocks
- Rockmass Integration
- Reinforced Concrete Beam
- Uniaxial Compression and Extension Tests with Concrete Model
- Tunnel Excavation in a Bonded Block Model
- Lined Circular Tunnel in an Elastic Medium with Anisotropic Stresses
- Braced Support of a Vertical Excavation
- Example: Ring Support of a Jointed Tunnel
- Cable-Reinforced Beam
- Example: Pull-Test for a Grouted Cable Anchor
- Advancing Lined Tunnel (Slip at Liner-Soil Interface)
- Demonstration of Large-Strain Sliding
- Simple Test of Liner-Block Interface Behavior
- Liner-Reinforced Beam
- Structural Liner in Jointed Tunnel
- Example: Shear and tension test for rockbolt crossing a joint

## Verification Problems

This section contains documentation on a series of verification problems and example applications that have been solved using 3DEC. The verification problems are tests in which the 3DEC solution is compared directly to an analytical (i.e., closed-form) solution. The example applications demonstrate various classes of problems to which 3DEC may be applied.

Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Apr 02, 2024 |